New Mas Trailer Tanker 2024 Carbon steel medium model tanker semi-trailer

MEDİUM MODEL TANKER

DIMENSIONS:

Length: 10,850 mm,
width: 2,550 mm (maximum),
height: 3,750 mm,
pin-ground clearance: 1,250 mm.

CHASSIS AND STRUCTURE:

Chassis: Carbon steel 100x200x5mm box section
Tanker Structure Monoblock
1 & 3 Compartments
Tank capacity between 30.000 lt & 36.000 lt
4mm steel

Axles

3 local axles are used, each with a capacity of 12 tons.
Air suspension.
The front axle is lifted and can be controlled from the cab.

The brake system is included.

Knorr or WABCO brand products are utilized in brake systems designed in accordance with European regulations. It features Automatic Brake Ratchets, Brake Valve, Brake Bellows (30 cylinder), Brake Pads (394x200), and Axle Brakes (4 Sensors 2 Modules EBS system). The trailer has two front interchangeable and protected brake sockets. A 60-gallon air tank is installed.

The electrical system includes

Saba Brand 2x7 pin sockets with 24V lights that conform to SAE standards.
Rear taillights, side marker lights, brake safety warning lights, and signal lights will also be installed.
There will be two tail and stop
combination lights, two turn signal combination lights, and
one license plate light.
The electrical system complies with European standards and is flame-retardant.


PARK FEET

OMS brand Park Feet
Including telescopic mechanical conveyor
Dynamic lifting capacity : 25 tons
Static lifting capacity : 50 tons
Low gear position : 0.98 mm / RPM





TIRES AND RIMS:

385/65/R22.5 STARMAX PETLAS, ( 6 pcs )
11.75 x 22.5, JANTSA rim (6 pcs)

KING-PIN:

Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate.


PAINTING:

All parts are carefully cleaned before painting.
First protective primer and epoxy is used for painting.
Two coats of high quality paint are applied to the tanker.
The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be reflected as an extra cost.

KURTUBA manhole cover:

It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Mushroom type breathers are mounted on top.

KURTUBA pneumatic control unit

It is installed inside the cabinet of the tanker. The air system drawn from the vehicle's air bottles is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure and allows the system to operate when the tank is empty.

KURTUBA Bottom Valve

3" Norm type bottom valve is connected to the bottom of the tanker separately to each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank on the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed.

KURTUBA Valve :

3" flanged ball valve is made of ST37 material and zinc plated against corrosion. The ball is made of ST37 material. Fuel and heat resistant Teflon material is used in sealing parts.

ACCESSORIES

6 pieces of mudguards
1 wheel chock
1 6 kg fire extinguisher box
1 spare wheel space
1 water tank 30 lt.
1 Folding ladder
Holder for two 3.5 m drain hoses

Note: Please contact us for your production requests in special sizes.