New Fliegl VTS S Parab/Feder low loader trailer




If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.




















Functionality: fully functional
Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland
Country of Registration: Germany
axle configuration: > 3 axles
Custom-Tailored Transport Solution
Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications
More Information
Chassis
Steel welded construction
Bebxwnqhsi Ri A Sj Iodg
Turntable with heavy-duty ball bearing
Foldable rear support
2 outrigger plates with holder
Aluminum side impact protection
Splash guards at the rear
covering the entire width
Semi-elliptical fenders for 1st and 2nd axles with anti-spray splash guards behind each axle
anti-spray splash guards in front of and behind the 3rd and 4th axles
Excavator arm recess starting above the rear axles and extending to the rear
approx. 1800 mm long
approx. 650 mm wide and approx. 150 mm deep
2 pairs of lashing points
each 5 tons
in the excavator arm recess on the side of the longitudinal frame
approx. 300 mm from the front and approx. 200 mm in front of the rear slope
1 plastic toolbox with insert
w=620/h=360/d=440 mm
lockable with a padlock (lock not included)
1 storage box recessed into the gooseneck with a cover
W=720 mm / L=520 mm / D=170 mm
Extendable widening sections to 3,000 mm
Wooden planks
70 mm
for widening to 3,000 mm
Storage compartment for wooden planks under the loading area
Lashing points for low-bed trailers (40 lashing options)
1 pair of lashing points on the gooseneck
each 5 tons
9 pairs of lashing eyes recessed on the top and side of the outer frame
each 10 tons
2 x at the front on the gooseneck
7 x in the low bed
6 pairs of lashing points in the outer frame of the low bed
each 5 tons (tie-down strap attachment)
3 pairs of folding lashing points
each 10 tons
1 x inside next to the main frame at the beginning of the low bed
1 x on the gooseneck (overhanging)
1 x behind the last axle
recessed into the floor
Coupling device
trailer turntable
Tow hitch with tested 50 mm drawbar eye
drawbar eye inclined 8°
D-value min. 160 kN
Axles + Suspension
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization at the front and rear (rocker arm equalization)
Wheels and Tires
235 / 75 R 17.5
according to the manufacturer's choice
Steel rims in twin arrangement
factory silver
Braking System
2-line compressed air braking system
Spring brake parking brake
2 fail-safe coupling heads at the front
with connecting lines to the tractor unit
ABS and ALB
with ABS connector at the front
with connecting cable
Electrical System
24 Volt
multi-chamber lights
yellow LED lighting on the sides
2 white position lights at the front
2 white/red side marker lights at the rear
2 x 7-pole fail-safe connectors at the front
with connecting cable
1 LED rotating beacon with holder
switched via parking lights (beacon removable)
2 pairs of warning panels
double LED illuminated and extendable to 3,000 mm
Floor
Gooseneck at the front with steel/diamond plate covering
followed by 70 mm soft wood flooring
steel/diamond plate covering in the wheel arch area
Rear slope with 70 mm soft wood flooring
Ramps
Steel ramps 2,800 mm long
750 mm wide
laterally adjustable
covered with wood
with spring-assisted support
Country of Registration/Signs
24/7 service hotline
prepared for license plate holder
two lines
Contour marking with reflective strips according to ECE R 048
white on the sides and red at the rear
Warning sign according to ECE - 70
Paintwork
Frame hot-dip galvanized including passivation
15-year